HGLRC XJB F440 Omnibus F4 and 40A BLHeli_32 3-5s 4in1

HGLRC XJB F440 Omnibus F4 and 40A BLHeli_32 3-5s 4in1
$77.99  $62.39 
Model : HGLRC-XJB-F440
Manufacturer : HGLRC
Add to Wish List Reviews Notify Me


The HGLRC XJB F440 is an awesome combo for your 4", 5" or even 6" beast with a 20x20 platform!  Simplify your wiring, reduce your soldering and build time significantly!  With the 40A 4in1 ESC it can support 5S and 5" props no problem.  The FC is an Omnibus F4 with a built in Betaflight OSD and can handle 8k/8k.  This whole combo has a 20x20mm bolt pattern and is 25x25mm. It mounts with M2 bolts. The optional switchable VTX has 0/25/100/250mW power levels and an IPEX/U.FL connector for your antenna.  This entire stack weighs only 8.9g!


  • Model: HGLRC XJB F440
  • Weight: 8.9g
Micro F4 Flight Control Board ( D-Shot Version)
  • MPU: MPU6000-SPI
  • CPU: STM32F405RGT6, dual 8K.
  • Black Box: Flash 16M
  • Input Voltage: 2-5S Lipo 
  • Built-in Betaflight OSD to adjust PID
  • BEC Output: 5V@3A
  • Size: 25x25mm board, 20mm mounting holes (M2 holes)
  • Weight:2.3g
  • Support Sbus/PPM/DSMX receiver 
HGLRC 40A 2-5S Blheli_32 4 in 1 ESC:
  • Input Voltage: 2-5S Lipo battery
  • Constant Current: 40A
  • Peak Current: 50A
  • BEC Ouput: NO
  • Firmware: BLheli_32
  • Size: 27x27mm (main board)
              32x34mm ( including pad)
  • Installing Hole: 20x20mm, M2 holes
  • Weight: 5.2g
  • CPU: STM32F051
  • Supports Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200 forward and reverse


  • 1x HGLRC  F4 AIO OSD BEC Flight Control Board
  • 1x HGLRC  40A Blheli_32 4 In 1 ESC
  • 8 x M2 x 5mm Nylon Spacers
  • 4 x M2 x 18mm Caphead Bolts
  • 4 x M2 Nylon Nuts


Post your build using this product to RotorBuilds.com and it will show up here!  Awesome :-)

Complete builds using this part: 

  • Shopping Cart
  • 0 items