RC Crazed Extra Slim Phast 5" (20mm Stack Only)

RC Crazed Extra Slim Phast 5" (20mm Stack Only)
$44.99 
Model : SLIMPHAST5-20MM
Manufacturer : RC Crazed
Available Options:
Add a 2nd set of stock 3d parts:
Add a Shark Fin:
Add arm protector paws:
Choose a 3D Parts Color:
Tell us your micro cam lens size:
Add to Wish List Reviews

Description

Slim Phast 5" Spare Parts Click Here - Slim Phast 5" 3D Parts Click Here

The RC Crazed Slim Phast is a purpose built racing frame and this new Extra Slim 5" model is no different.  It is light, strong, and feature packed. We designed this 5" variant around a 20x20mm stack to make it much smaller in the center section just like our 4" model. This frame is also designed around the RunCam Micro Swift FPV camera.  Full-size and mini cameras will work but you won't have the same degree of protection for your FPV camera.  This thing is very rigid and sports 5mm thick arms that are 10mm wide.  The arms are wide enough so that they don't turn in to rubber bands from the torque twisting produced by powerful motors and thick enough to crash and crash and keep on flying.  The main plate is 3mm thick and the top plate is 2mm thick. There is a slight stretch to the frame and the MTM comes in at 210mm.  We went through several prototype revisions to find the right balance of weight, strength and flight characteristics just like we did with our original 5" model.  This Extra Slim Phast 5" is designed around a 20x20mm stack and has M3 holes for the stack mount.  We include a set of our M3 to M2 adapters if you want to adapt the M2 to fit snugly in the M3 holes.

Our local Cleveland Quad Squad pilots really put this frame to the test just like our other Slim Phast models and the feedback has been awesome!  We include loads of 3d printed parts to complete the package including camera mounts, a micro swift protector, a top plate mounted camera bumper, and a rear standoff mounted VTX and RX antenna mount.  We include all these parts in green but you can add a second set of parts in other colors as well as some other cool add ons like arm protector paws, and a single layer stack mount that holds an XM+ and a VTX03 perfectly!  It will also work with other micro RX and VTX setups.

AXII Antenna Mount: https://www.thingiverse.com/thing:2525248

Specs 

  • Weight: 82g with all of the included hardware and 3d parts
  • 20x20mm stack supported only
  • Compatible with 22XX motors
  • 5" propellers
  • 3mm thick main plate
  • 2mm thick top plate
  • 5mm thick and 10mm wide arms
  • MTM distance is: 210mm
  • Designed for the RunCam Micro Swift, but works with most cams
  • Comes with all kinds of 3d printed goodies

Included

  • 1 x 3mm main plate
  • 5 x 5mm arms (one spare included)
  • 1 x 2mm skinny top plate
  • 4 x M3x16mm steel bolts (inner most arm bolt)
  • 4 x M3x14mm steel bolts (outer most arm bolt)
  • 4 x M3x6mm steel bolts (top plate)
  • 4 x 20mm aluminum standoffs (inner most arm bolt)
  • 4 x M3 Flanged nylock nuts (outer most arm bolt)
  • 4 x M3 nylock nuts (inner most arm bolt between the arm and standoff)
  • 4 x M3 to M2 stack mount adapters
  • Camera standoff mounts
  • RunCam Micro Swift protective cover (choose lens option)
  • Camera guard bumper
  • VTX and RX antenna mount
  • Battery Strap

Option Parts

  • Add a 2nd set of stock 3d parts: This will get you the camera cover, camera mounts, VTX/RC antenna mount, and the top plate bumper as a set in the color of your choice
  • Add a Shark Fin: These are mounted with the 4 top plate bolts and really help with Turtle/Quopa mode by keeping two of your props off the ground and up out of the grass for easy self righting
  • Add arm protector paws: These guards will protect your arm ends and can be flipped around to double as motor soft mounts

Videos

Build Video:

RotorBuilds

Post your build using this product to RotorBuilds.com and it will show up here!  Awesome :-)

Complete builds using this part: 


Categories
Manufacturers
  • Shopping Cart
  • 0 items