Raging Droner 5R Frame Kit

Raging Droner 5R Frame Kit
$67.99 
Model : DRONER5
Manufacturer : Catalyst Machineworks
Available Options:
Add a canopy with fin:
Add to Wish List Reviews

Description

Sometimes a Massive Droner isn't enough. Hard to believe right? When the "need" arises don't leave them hanging. Pull out your Raging Droner 5R and put them in their place. We are hard at work creating the next big revolution in 5" race spec frames. We took the successful design elements from our three most popular frames (Massive Droner, Merica, and Smooth Operator), and rolled the best parts of each into one amazing machine. We are in the final stages of CAD design now. Plans are to begin cutting some prototype frames to begin flight/crash testing in the next couple weeks. ETA for our first production run will be 6 to 7 weeks from now. At this point we do not know pricing. Stay tuned for more info as we develop your new go-to racing frame for the 2019 season. This one will be HARD to beat. 
 

Specs

  • 75 grams (standard kit w/ hardware - no canopy)
  • 81 grams (hybrid kit w/ hardware - no canopy)
  • Carbon Fiber: Twill Weave 3K Matte
  • CF arm thickness: 5mm (standard kit)
  • CF arm thickness: 5mm and 6mm (hybrid kit)
  • CF arm front brace thickness: 4mm
  • CF cage plate thickness: 2mm
  • Frame Size: 203mm (standard kit)
  • Frame Size: 222mm (hybrid kit)
  • Camera Angle Range: 0 - 90 degrees
  • Motors supported: 22xx, 23xx, 24xx or similar 
  • Lipos supported: 3s, 4s, 5s, 6s 
  • Lipo mounting position: Bottom 
  • Prop Size: 5 inch
  • Fastener Material: Aircraft Grade 7075, allow steel, black plastic
  • Accepted ESC: (30.5mm x 30.5mm or micro 20mm x 20mm)
  • Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles 
  • Supported FPV Cameras: Micro Camera
  • Uses the same arms as the Merica!
  • Uses the same optional rear arm brace as the Merica Stretch 5" (standard kit) - sold separate
  • Uses the same optional rear arm brace as the Merica Stretch 6" (hybrid kit) - sold separate
  • Optional Turtle mode canopy w/fin (sold separate) 
  • Optional HD camera canopy (sold separate) 
  • Optional GoPro Mount (sold separate)
  • Optional Session Mount (sold separate)

Included

  • 4 ARM - 5MM MATTE FINISH CARBON FIBER
  • 1 BOTTOM PLATE – 3MM MATTE FINISH CARBON FIBER + M3 PRESS NUTS X 8
  • 2 ARM SPACER – 6MM MATTE FINISH CARBON FIBER
  • 1 FRONT ARM BRACE - 4MM MATTE FINISH CARBON FIBER
  • 1 CAGE PLATE TYPE 1 – 2MM MATTE FINISH CARBON FIBER
  • 1 CAGE PLATE TYPE 2 – 2MM MATTE FINISH CARBON FIBER + M3 PRESS NUTS X 1 1 REAR CAGE BRACE – 2.5MM MATTE FINISH CARBON FIBER
  • 1 FRONT CAGE BRACE – 2.5MM MATTE FINISH CARBON FIBER
  • 1 M3 X 27MM SOCKET HEAD SCREW – BLACK 7075 ALUMINUM
  • 6 M3 X 12MM SOCKET HEAD SCREW – BLACK 7075 ALUMINUM
  • 4 M3 X 18MM SOCKET HEAD SCREW – BLACK 7075 ALUMINUM
  • 2 M3 X 10MM SOCKET HEAD SCREW – BLACK 7075 ALUMINUM
  • 16 M3 X 8MM SOCKET HEAD SCREW – BLACK 7075 ALUMINUM
  • 2 #2 PHILLIPS HEAD SHEET METAL SCREW X 7/16" LONG
  • 4 #4 PHILLIPS HEAD SHEET METAL SCREW X 1/2" LONG
  • 1 M3 WASHER – SILVER ALUMINUM
  • 8 M3 SPACER – BLACK PLASTIC
  • 8 M3 NUT – BLACK PLASTIC
  • 4 M3 PHILLIPS HEAD SCREW X 12MM LONG – BLACK PLASTIC
  • 4 M3 MALE / FEMALE STANDOFF X 6MM LONG – BLACK PLASTIC
  • 2 M2 X 4MM SOCKET HEAD SCREW – STEEL
  • 2 M2 WASHER – STEEL
  • 2 M3 X 19MM KNURLED STANDOFF - BLACK ALUMINUM
  • 1 M3 X 4.5MM OD X 19MM LONG SPACER – SILVER ALUMINUM
  • 1 CAGE MOUNT BLOCK – BLACK 3D PRINTED TPU
  • 2 BLACK ANTENNA TUBE
  • 1 VELCRO BATTERY STRAP – CATALYST MACHINEWORKS AWESOMENESS

 

RotorBuilds

Post your build using this product to RotorBuilds.com and it will show up here!  Awesome :-)

Complete builds using this part: 


Categories
Manufacturers
  • Shopping Cart
  • 0 items