Armattan Chameleon Frame 5"

Armattan Chameleon Frame 5"
$95.00  $44.00 
Model : Chameleon5
Manufacturer : Armattan
Available Options:
Optional Camera Plates:
Choose a color:
Add to Wish List Reviews Notify Me


-Kits ship with smooth rounded arm ends-
The Armattan Chameleon is a lovingly calculated, dedicated freestyle frame developed and produced by Armattan Quads. As a new flagship model, every included feature was carefully considered and artfully incorporated into the final revision. While many of those features are fairly traditional, there are a few innovations that would benefit from a closer examination. The first is the "low-rider" style top-plate. This lowered mount gets the battery closer to the center of gravity for this machine. This means your rolls and flips will be snappier, and less likely to over-rotate. An unexpected (but very welcome) feature of the recessed top-plate is that the camera cage will be more likely to protect your battery in the event of an upside-down impact.
Speaking of the camera cage, the 4mm thick, 6061 aluminum structure on the front of this frame corners the market for providing the most protection and versatility in mounting your cameras. Not only will your frame fully protect your FPV camera above 25 degrees but it allows for near unlimited vertical play. If you want to fly backwards like Suki or take things at a more relaxed pace, this will let you achieve the angle you need. Plus, Armattan's thumb-screw system makes it easy to switch between the two on the fly (pun totally intended). In addition, the HD camera mounting plate allows you to adjust the angle of your recording device from 30 up to 60 degrees. No more will you have to cut and mount a wedge of foam in order to get the ideal, "single" recording angle. You can fine tune larger or smaller as desired with your standard M3 driver.
The third Chameleon innovation (that we will explore here) is the VTX mount on the rear of the bus. While it is outwardly a solid point to mount your SMA adapter, it has a couple secret functions as well. Cut into the carbon fiber top-plate are a set of holes that line up above where you will mount your VTX. These were carefully measured to align with the screens, dip-switches, and buttons of many popular transmitters on the market today (Hawkeye, Aomway, etc). We think changing your channel at the field should be as quick and easy as changing your camera angle. This helps us achieve that goal. The other secret is the little bar next to the SMA hole. This is a diversity receiver mount for your RX of choice. If you zip two ties to that spar you can angle them for horizontal (out the back) and vertical (out the top) polarization. This should help prevent against an unforgiving fail-safe at the start of your greatest dive yet.


  • Lifetime warranty on all of the carbon fiber and aluminum parts!!
  • 5" propellers supported
  • 22XX motors supported
  • 4mm thick main plate
  • 2mm thick top plate
  • Aircraft Grade 6061 Aluminum
  • 3k twill weave carbon fiber of the highest quality
  • Frame weight is: 118g
  • MTM distance is: 220mm


  • Frame and all the associated hardware
  • Camera cage and all the associated hardware
  • 8 x M3 rubber FC O-rings
  • 4 x Foam Landing Pads
  • 1 x Lipo Top Plate Foam Pad
  • 1 x HD Cam Foam Plate
  • 2 x rubber SMA O-rings
  • Nylon stack hardware

Required For a Complete FPV Build

  • 4 x 22XX Motors
  • 1 x Velcro Strap
  • 1 x PDB
  • 4 x 20a or 30a ESC for 4S running
  • 1 x Flight Controller
  • 1 x Receiver
  • 1 x Video Transmitter
  • 1 x FPV video camera
  • 1 x 5v step down (may not be required with some FCs)
  • 4 x 5" Propellers
  • 1 x 1,300mah 4S battery




Post your build using this product to and it will show up here!  Awesome :-)

Complete builds using this part: 

  • Shopping Cart
  • 0 items