HGLRC XJB F413 Omnibus F4 and 13A BLHeli_S 4in1

HGLRC XJB F413 Omnibus F4 and 13A BLHeli_S 4in1
$55.90 
Model : HGLRC-XJB-F413
Manufacturer : HGLRC
Add to Wish List Reviews

Description

The HGLRC XJB F413 is an awesome combo for your micro brusless monster!  Simplify your wiring, reduce your soldering and build time significantly!  With the 13A 4in1 ESC it can support 3S and 3" props no problem.  The FC is an Omnibus F4 with a built in Betaflight OSD and can handle 8k/8k.  This whole combo has a 20x20mm bolt pattern and is 25x25mm. It mounts with M2 bolts.  The optional switchable VTX has 0/25/100/250mW power levels and an IPEX/U.FL connector for your antenna.  This whole stack weighs only 5.5g!

Specs 

  • Model: HGLRC XJB F413-TX20
  • Weight: 5.5g w optional VTX
  • Usage: for 65mm-130mm Frame Kit
 
Micro F4 Flight Control Board ( D-Shot Version)
  • MPU: MPU6000-SPI
  • CPU: STM32F405RGT6, dual 8K.
  • Black Box: Flash 16M
  • Input Voltage: 2-4S Lipo 
  • Built-in Betaflight OSD to adjust PID
  • BEC Output: 5V@3A
  • Size: 25x25mm board, 20mm mounting holes (M2)
  • Weight:2.3g
  • Support Sbus/PPM/DSMX receiver 
HGLRC 13A 2-3S Blheli_S BB2 4 in 1 ESC:
  • Input Voltage: 2-3S Lipo battery
  • Constant Current: 13A
  • Peak Current: 20A
  • BEC Ouput: NO
  • Firmware: BLheli_S 16.5
  • Size: 23x23mm ( including pad)
  • Installing Hole: 20x20mm, M2 holes
  • Weight: 3g
  • CPU: SILABS EFM8BB2 48MHZ
  • MOS Tube: TOP QUALITY MOSFET
  • Firmware: BLHeli_S
  • Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse

Included

  • 1 x HGLRC  F4 AIO OSD BEC Flight Control Board
  • 1 x HGLRC  13A Blheli_S 4 In 1 ESC
  • 8 x M2 x 5mm Nylon Spacers
  • 4 x M2x18mm Caphead Bolts
  • 4 x M2 Nylon Nuts

RotorBuilds

Post your build using this product to RotorBuilds.com and it will show up here!  Awesome :-)

Complete builds using this part: 


Categories
Manufacturers
  • Shopping Cart
  • 0 items